clamping

英 [ˈklæmpɪŋ]

美 [ˈklæmpɪŋ]

v.  (用夹具)夹紧，夹住，固定; 紧紧抓住; 紧夹住; 被抓住; 被夹紧; 用夹锁锁住(车)
clamp的现在分词

现在分词：clamping　

计算机

BNC.43220 / COCA.42307

柯林斯词典

• 夹子;夹具;夹钳
  Aclampis a device that holds two things firmly together.
• VERB (用夹具)夹紧，夹住，固定
  When youclampone thingtoanother, you fasten the two things together with a clamp.
  1. Somebody forgot to bring along the U-bolts to clamp the microphones to the pole.
     有人忘了带把麦克风固定在支架上的U形螺栓。
• VERB 将…固定(在某处)；紧紧抓住
  Toclampsomething in a particular place means to put it or hold it there firmly and tightly.
  1. Simon finished dialing and clamped the phone to his ear...
     西蒙拨完号，把听筒贴在耳边。
  2. He clamped his lips together...
     他紧闭双唇。
  3. You beg him to try just one spoonful, and he clamps his mouth shut...
     你求他就尝一匙，可他就是不张嘴。
  4. Peter jumped to his feet with his hand clamped to his neck.
     彼得一只手捂着脖子，腾地跳了起来。
• (将违章停放的车辆扣在原地的)夹钳，车轮固定夹
  Aclampis a large metal device which is fitted to the wheel of an illegally parked car or other vehicle in order to prevent it from being driven away. The driver has to pay to have the clamp removed.

in AM, use 美国英语用 Denver boot


• VERB 给(车辆)上夹钳
  Toclampa car means to fit a clamp to one of its wheels so that it cannot be driven away.
  1. Courts in Scotland have ruled it illegal to clamp a car parked on private ground and then to demand a fine.
     苏格兰法院裁定，将停在私人地界上的车辆上夹钳并索要罚款的行为是违法的。

in AM, use 美国英语用 boot

双语例句

• Press off clamping washers with a suitable tool, remove shield and shield cover with rivet bolt.
  用合适的工具压出夹紧垫圈，并拆下罩和带铆钉螺栓的屏蔽罩。
• Hydraulic hob mandrel clamping.
  液压滚心轴夹紧。
• Simple, safe and reliable operation, high efficiency insertion and automatic controlled clamping and contraposition.
  操作简单，安全可靠，植入效率高并能自动控制夹紧、对中。
• The utility model provides a reliable clamping device for connection between various nonmetallic hoses and hard tubes.
  在为各种非金属软管与硬管的联接上，提供了可靠的卡具。
• The corresponding position of the other supporting hook is provided with locking clamping pieces.
  另一托钩上相应位置设有锁定卡件；
• Mechanical shaft clamping via single taper mechanism, hydraulically actuated, including tailstock support.
  通过液压系统操纵锥体，连同尾架支承将工件机械夹紧。
• The clamping nut is fixed into a housing together with the bearing.
  夹紧架与轴承一起固定在电机的外壳里。
• The clamping schemes of thin-walled package were discussed on the base of FEM analysis.
  采用有限元分析方法，对薄壁件的装夹方案进行了讨论。
• New functional construction on fly cutter drive, positioning clamping and support.
  飞刀的传动、定位夹紧及支撑采用了一系列新型的功能性结构。
• In this paper, an effective solution-flexible clamping is introduced for grinding this kind of part.
  文中介绍了该类零件加工中一种行之有效的解决方案&柔性装夹。