short-circuiting

英 [ˌʃɔːt ˈsɜːkɪtɪŋ]

美 [ˌʃɔːrt ˈsɜːrkɪtɪŋ]

v.  (使)短路; (做事)抄近路，走捷径
short-circuit的现在分词

柯林斯词典

• V-ERG (使)短路
  If an electrical deviceshort-circuitsor if someone or somethingshort-circuitsit, a wrong connection or damaged wire causes electricity to travel along the wrong route and damage the device.
  1. Carbon dust and oil build up in large motors and cause them to short-circuit...
     碳尘和燃油在大发动机里越积越多，造成了发动机短路。
  2. Once inside they short-circuited the electronic security.
     一旦置入，它们就会使电子安全设施短路。
  3. Short-circuitis also a noun.
     
  4. The fire was started by an electrical short-circuit.
     火灾是由电线短路引发的。
• VERB 回避，绕过（某一流程或程序)
  If someone or somethingshort-circuitsa process or system, they avoid long or difficult parts of it and use a quicker, more direct method to achieve their aim.
  1. The approach was intended to short-circuit normal complaints procedures.
     这种方法旨在避开正常的投诉程序。

双语例句

• Analysis of synchronous multi-information and experimental research of short-circuiting transfer process in CO 2 arc welding
  CO2焊短路过渡过程的同步多信息分析及试验
• A arc parameter-measuring system was developed to analyze the process of short-circuiting arc welding and the effect of arc energy on the welding stability.
  为了分析短路过渡电弧的焊接过程和探讨电弧能量对焊接稳定性的影响，设计了短路过渡电弧电参数检测系统。
• The Finnish phone maker has received around 100 reports of its phones short-circuiting while being charged.
  芬兰手机制造商已经收到大约100份由于手机短路而被起诉的报告。
• The rule of the arc-time and short-circuiting transfer cycle time under the high speed welding was researched by welding quality analyzer of Hannover.
  采用汉诺威焊接质量分析仪，研究了在高速焊接的情况下，燃弧时间与短路过渡周期的变化规律。
• The Employer reserves the right to perform additional inspection of production welds made using GMAW in the short-circuiting transfer mode.
  业主保留对使用短路过渡模式下的gmaw的生产焊缝进行附加检验的权利。
• Based on the approximate entropy theory and related algorithm, approximate entropy analysis of current in short-circuiting arc welding in CO_2 shielding gas are performed from the point of view of nonlinear time sequences.
  依据近似熵的理论和算法，从非线性角度对纯CO2保护气体条件下短路过渡电弧焊的电流信号进行了近似熵分析。
• Multivariate statistical process control for on line monitoring of short-circuiting GMAW
  短路GMAW焊在线质量监测的多变量统计过程控制方法
• Based on the research of reason of splatter generating in the process of short-circuiting transfer, it tries to control the splatter of CO2 welding by longitudinal magnetic field.
  在研究短路过渡飞溅产生原因的基础上，初步尝试了用纵向磁场来控制CO2气体保护焊飞溅。
• The direct current reactor is used in order to obtain favorable dynamic property and attain the request of short-circuiting transfer to welding power supply, which makes the welding machine obtain excellent welding performance.
  为获得良好的动特性，达到短路过渡对焊接电源的要求，加入了直流电抗器，从而使焊机具有良好的动特性，获得优良的焊接工艺性能。
• According to the analysis we can get the result of the welding quality from the current and voltage of the CO_2 gas shield droplet short-circuiting transfer.
  在此基础上，采用本系统对熔滴短路过渡CO2气体保护焊的焊接电流和电压波形进行了实时采集、存储。